www.bmecsz.com

ABOUT US

Air-cooled Cutting Torch (DC40A)

Model JG-40-4 Cutting Torch+4.0m Cable (without conducting arc wire)

Model JG-40-7 Cutting Torch+7.0m Cable (without conducting arc wire)

Main Components

1.JG-40(I) Elbow brass-made torch body with lock spring (without conducting arc wire)

2.JG-40(II) Elbow copper-made torch body without lock spring (without conducting arc wire)

3.212.06.009 11.8×2.65 check "O" rubber ring

4.JG-40E(S) Short electrode

5.JG-40L(S) Long electrode

6.JG-40 D Distributor (gas distributing ring)

7.JG-40 T(S) Short tip (d=0.9,1.0*,1.1)

8.JG-40 T(L) Long tip (d=0.9,1.0*,1.1)

9.JG-40 S Ceramic shield cup

10.212.06.015 Handle

11.K02 Switch

12.213.06.002 Cable assembly adapted to torch (gas and power nut)3/8"-24

13.113.10.009 Cable assembly adapted to machine (gas and power nut)9/16"-18

Note:

Tips of JG-40T(S) and JG-40T(L) are usually provided with their diameter 1.0(*)
Any special requirments should be specified by user when ordering;

It has good observability during cutting;

Contact cutting can be carried out with easy operation;

Compressed air with a range of 0.2-0.4 MPa is used as working gas;

Shield cup S must be fixed tightly to E、T、D on the head of torch;
Natice: looseness between these parts may cause damage to cutting torch!

Special cable assembly adapted to cutting machine can be provided of the request of customer.